Please forgive me if this gets long, just want to give as much information as possible. Let me start out by saying that my department switched over to narrowband back in November of 2010.

Jan 21, 2012 - The municipalities will likely upgrade to the Minitor V as it's narrow band capable. Never fear, if you use the engineer login function of the pager programming software (in Minitor4 PPS ver 1.8.1), you can edit the engineering data, and change. It gives you the pinout diagrams for the Minitors III, IV and V.

We purchased 10 new Minitor V pagers, and reprogrammed some existing Swissphone RE629's (narrowband compliant), to align ourselves with the tone sets for dispatch (we have 2 2-tone, and 1 long). We have been experiencing some issues with the Minitor V's, and want to see if it may be something that can be corrected with programming, or if they need to be sent back for a 're-tune'.

The 5's don't always open on dispatch, and the record quality, well, just plain sucks. The pagers have a great deal of static. The swissphones do not seem this way, and it is definately not something with location. I have been trying to go through our old pagers for our recruits and for spares (minitor II, III, IV, swissphone RE529, and USAlert Nova's- all wide band) and all of them open fine and record great. In fact, they work better than before the narrowband switch.

These are all being tested in the same location as the Minitor V. In looking at the programming options, it looks like the 5's can be set for wideband, and I also need to confirm the proper frequency and dispatch tones. Do you think this may help, or should I just forgo this step, and just send them back to be re-tuned.

Please forgive to the long post. I am new to the radio and pagers with our department, and have been trying to research and read as much as possible to catch up. I am in the process of getting a MOT account to access any FSB's or firmware upgrades, to see if there may be a solution there. Any assistance or guidance is greatly appreciated.

TJ fineshot1 8:35 AM. I am going to agree with fineshot. If all 10 M-V's are misbehaving in the same way and all your other pagers are working fine, then there is definitely a problem between the existing system and the V's. Confirming your narrow/wide situation, dispatch frequency and pager tones is a good start and needs to be done first. There is no new firmware upgrade beyond 3.0 that I have been able to locate and that one is at least 18 months old or older.

If you have the programming kit for the V's, the firmware version will show in the User Data. Hp C5683a Usb Driver. If it is 3.0, no need to hunt further.

Unless someone knows of a newer firmware version, that is. Again, if you have the programming kit, read the pager and post the results here after you get your tone and frequency info. I am betting it is something simple in the programming of all 10 V's and can easily be fixed without taking them out of service for trip to the shop. TJ_in_IL 4:25 PM.

I don't have it in front of me right now, but if I recall from the dealer printout, the codeplug version was 0.77? I would have to get into the program itself if that is not it. Thanks, TJ In the PPS, the Code Plug Version and the Pager Firmware Version are both displayed under the General tab in the Revision box.

If you have the dealer printout from the PPS, the PAGER VER. Is right under the PLUG VER.